• 内径研磨机

     内径范围0.125MM-0.140MM

    内径范围:0.140MM-0.180MM

    内径范围:0.180MM-0.220MM

    内径范围:0.220MM-0.260MM

    1:几何校正:圆度.圆柱度.roundness and cylindricity

    2:孔径尺寸的确定 尺寸精度

    3:表面加工.

    4:孔内定位校直

    5:简单的工件夹具simple workpiece fixture possible

    6:阶梯孔最小内径的加工machining of smallest inner diameters on stepped bores 

    7:只有最小限度是必要的only a minimum of over is necessary

    8:过程分析的质量控制quality control by process analyses

    9:根据孔直径清除余量2-10微米stock removal of approx,2-10um depending on bore diameter

    10:钻孔长度材料bore length and material 


    ¥0.00
  • 典型工件: 对称旋转工件. 外径:直径1~8mm. 长度:5~16.5mm. 材料:蓝宝石,陶瓷品,陶瓷制品,硬质合金,碳化钨,普通钢,等
    ¥0.00
  • 典型工件: 对称旋转工件. 外径:直径1~8mm. 长度:5~16.5mm. 材料:蓝宝石,陶瓷品,陶瓷制品,硬质合金,碳化钨,普通钢,等
    ¥0.00
  • Strip-fed wire grippers may be inserted with a universal head. Wire grippers are fed from component reels and indexed,one at a time,into the insertion head.A lower support assembly supports the during insertion.The snap fit gripper is extracted from the reel and inserted.Continuity is sensed during the cycle to verify insertion.Scrap is removed from the machine during each index..
    ¥0.00
本网站由阿里云提供云计算及安全服务